cecotec GRANDHEAT 3110 Manual De Instrucciones página 77

1. PARTS AND COMPONENTS
Fig. 1.
1. Control panel
2. Mica panel
3. Rotary plate rotating shaft
4. Rotary plate rotating ring
5. Plate
6. Door
7. Door lock system
8. Grill
Control panel
Fig. 2.
1. Power knob
2. Timer
2. BEFORE USE
- Take the product out of the box. If the microwave has a protective film, tear it off before
starting operation. Check carefully if there is any damage, and if there is, immediately
notify the Technical Support Service of Cecotec.
- The product must be placed on a flat, stable and dry place and kept away from corrosive
materials, heat and humidity, such as gas burners or water.
- The product must be sufficiently ventilated and must therefore be placed at least 85 cm
above the ground. You must ensure a distance of at least 30 cm on top and at least 20 cm
between the device and any adjacent wall. Behind the device, leave 10 cm.
- The product must be placed, at least, at 5 m from the TV, Radio or antenna.
- The product must be placed in such way that the plug is accessible and must ensure an
effective grounding in case of leakage in order to avoid electric shocks.
- The microwave door must be closed in order to operate.
- In case there is any manufacturing rests in the microwave cavity or on the heating elements,
leave the microwave open to ensure good ventilation. In such case, it is recommended to
heat a glass of water at high power for several times.
Warning
Do not try to remove the mica plate. This component is essential for the proper functioning of
the device. This plate must be clean to ensure its proper operation.
GRANDHEAT 3120/GRANDHEAT 3110
GRANDHEAT 3130/GRANDHEAT 3140 MIRROR
GRANDHEAT 3150 /GRANDHEAT 3160 MIRROR
ENGLISH
77