Publicidad
Idiomas disponibles
Idiomas disponibles
LIQUID AIR V1
LIQUID AIR V2
Note: Gauge will not respond until reaching 4psi. Just keep pumping for 2-3
minutes!
Max. Pressure –
Keep pumping the
board until you
reach 15-18 psi.
Fast Inflation – Use DOUBLE
ACTION position by closing
the air-tap to pump the
board up to 7-10 psi.
Fast Inflation – Use DOUBLE
ACTION mode with the top
cap displaying "2" to pump
the board up to 7 - 10 psi.
After inflation, return the valve cover and tighten in
clockwise direction to lock in place.
Easy Inflation – Switch to
SINGLE ACTION position
by removing the air-tap for
easier inflation.
Easy Inflation – Rotate the
switch to SINGLE ACTION
mode with the top cap
displaying"1" for easier
inflation.
12PSI minimum (8PSI for MEGA/ 10PSI
for HYPER inner chamber) for proper
inflatable boards operation and 15PSI
maximum (18PSI for SUPER TRIP
TANDEM/ RAPID/ RACE/ RACE ELITE/
WAVE/ BLADE/ AIRSHIP RACE ). Over
inflation will void your warranty.
9
Publicidad
