Publicidad
Idiomas disponibles
Idiomas disponibles
BIG BEN
SPECIFICATIONS
Power Handling: 400 watts RMS
Impedance: 8 Ohms
Frequency Response and SPL: 100 dB SPL @ 2W1M
(–6dB @ 25 Hz and 3 kHz)
Speaker Complement: (1) 18" Woofer
Spring Loaded Rubber Grip Handles, Rear Circular Ports
Dimensions: 23"W x 30.5"H x 18.5"D
Weight: 73 lbs.
DESCRIPTION
Big Ben is an extremely fast, 1x18 subwoofer. It can be used as a stand-alone
speaker enclosure, as part of a bi-amp system, or as the low end component for
any large, multi-speaker bass rig. It's a must-have for any true bottom dweller.
CONNECTION AND OPERATION
Big Ben can be connected to any musical instrument amplifier that is capable of driving an 8 ohm load. To connect your ampli-
fier to Big Ben, run a high quality speaker cable (18 gauge or heavier) from your amplifier's speaker output to one of the des-
ignated speaker inputs (Speakon on 1/4") on Big Ben's input panel.
POWER HANDLING
The power output rating for any amplifier connected to Big Ben should not exceed the enclosure's 400 watt RMS power han-
dling capacity. Please be aware that exceeding Big Ben's power handling capacity can void the SWR warranty if any damage
occurs to the 18" woofer due to overpowering.
FULL RANGE INPUT AND OUTPUT JACKS
Big Ben features four, full range input/output jacks (two standard 1/4" and two Speakon) wired in parallel. If you are running
two speaker enclosures in parallel, connect the speaker cable from your amplifier to either jack labeled "IN," and a second
speaker cable from either jack labeled "OUT" to the input of the second speaker enclosure.
10 • Professional and Custom Pro Specialist Series
Publicidad
