Publicidad
Idiomas disponibles
Idiomas disponibles
12-STACK
SPECIFICATIONS
Description: 4x12 bass speaker enclosure
Power Handling: 800 watts RMS
Impedance: 8 Ohms
Speaker Complement: Four custom 12-inch SWR drivers
Heavy-Duty Inset Metal Handles, Front Slot Port,
Removable Casters
Dimensions: 26.5" W x 30.5" H x 16.5 D
Weight: 102 lbs.
CONNECTION AND OPERATION
The 12-Stack can be connected to any musical instrument amplifier that is
capable of driving an 8 ohm load. To connect your amplifier to the 12-
Stack, run a high quality speaker cable (18 gauge or heavier) from your amplifier's
speaker output to one of the designated speaker inputs (Speakon or 1/4") on the 12-Stack's input
panel.
POWER HANDLING
The power output rating for any amplifier connected to the 12-Stack should not exceed the
enclosure's 800 watt RMS power handling capacity. Please be aware that exceeding the 12-Stack's power handling capacity
can void the warranty if any damage occurs to your loudspeakers due to overpowering.
FULL-RANGE INPUT AND OUTPUT JACKS
The 12-Stack features four full range input/output jacks (two standard 1/4" and two Speakon) wired in parallel. If you are run-
ning two speaker enclosures in parallel, connect the speaker cable from your amplifier to either jack marked "IN," and a sec-
ond cable from either jack labeled "OUT" to the input of the second speaker enclosure.
Professional and Custom Pro Specialist Series • 21
Publicidad
