Instruction manual
The appliance can be used manually with its built-in controls, remote
control or you can use a smart phone or voice to control it. Before you
begin, ensure the Homewizard Climate app is downloaded. The
Homewizard Climate app is available on Android and iOS.
Pair your appliance to HomeWizard Climate app
•
Make sure the appliance is powered.
•
Open HomeWizard Climate APP.
•
Create an account or if you already have a HomeWizard account,
please log in using those details.
•
Click "Add new Climate Device" to add a new device.
•
Select the device you want to connect.
•
Follow the instructions on the app to connect the appliance.
INSTALLATION
•
The air-conditioner should be installed on a flat and stable surface. Do
not block the air outlet and allow at least 30cm around the unit.
•
Socket wiring should be in accordance with the local electric safety
requirements.
Exhaust Hose Installation
•
Twist both ends of the hot-air exhaust hose(9) into the hose connector
window end(8) and the hose connector air conditioner end(10).
•
Insert the hose connector air conditioned end(10) into the openings at
the back of the air conditioner.
•
Fix the hose connector window end(8) to the nearest windowsill.
10
Universal Window Kit Installation
•
Clean the window and window frame with soap or detergent and make
sure the entire window frame is dust and grease free.
•
Cut the Velcro to the dimensions of the window with scissors.
•
Attach the Velcro around the entire window. Note: don't stick the
Velcro onto the glass.
•
Attach the cloth to the Velcro tape. Start with the narrow part and work
from the center towards the rest of the Velcro tape, which is attached
on the window frame and around the window.
•
It may be useful to open the window while attaching the cloth. Make
sure to leave enough room in the corners so the cloth won't get stuck
in the window.
•
Open the window kit's zipper by about 50 centimeters.
•
Place the air conditioning hose in the opening of the cloth. After that,
close the zipper until the air condition hose is placed.