Princess Smart Air Conditioner 9000 Manual De Usuario página 4

Instruction manual
– In the case of any damage, please
disconnect the power supply and contact
the dealer or a designated repair shop.
– In any case, the power cord shall be firmly
grounded.
– To avoid the possibility of danger, if the
power cord is damaged, please disconnect
the power supply. It must be replaced by the
dealer or a designated repair shop.
Warning
• Please use the recommended defrosting and
cleaning process from the manufacturer only.
Do not accelerate the defrosting or cleaning
process in any other way.
• The appliance shall be stored in a room without
continuously operating ignition sources (for
example: open flames , an operating gas
appliance or an operating electric heater).
• Do not pierce or burn.
• Be aware that refrigerants may not contain an
odor.
• The appliance should be installed, operated and
stored in a room with a floor area larger than X
m2. (X=12 for 9000Btu/h; X=15 for 12000Btu/h)
• Only contact an authorized service technician
for repair or maintenance of this unit.
4
• Do not pull , deform or modify the power supply
cord or immerse in water . Pulling or misuse of
the power supply cord could result in damage to
the unit and cause an electrical shock.
• Compliance with national gas regulations
should be observed.
• Keep ventilation openings clear of obstructions.
• Servicing should only be performed as
recommended by the equipment manufacturer.
Maintenance and repair requiring the assistance
of other skilled personnel should be carried out
under the supervision of a person(s) competent
in the use of flammable refrigerants.
• Do not stop the unit by pulling out the power
plug whilst in operation as this may cause an
electric shock or fire due to heat generation
unless strange sounds are heard or if strange
smells or smoke appear from the unit.
Specific information regarding appliances with R 290 refrigerant gas.