Black and Decker PRO Serie Manual De Instrucciones página 39

MOTORIZED BENCH SAW PARTS
Fig. 1 illustrates the saw removed from the container. Figs. 2 and Fig. 3 illustrate the loose items
packed with the saw. Fig. 4 illustrates the loose items packed for the stand ONLY.
FIG. 2 PARTS
1. Rip Fence
2. Splitter and Guard Assembly
3. Lock Handle for Rip Fence
4. Blade Raising and Lowering Handwheel
5. Handle for Blade Raising and Lowering Handwheel
6. Screw for Mounting Handwheel Handle
7. Cap for Handle
8. Miter Gauge
9. Splitter Support Bracket
10. Splitter Bracket
11. Miter Gauge Holder
12. Spring Clip for Miter Gauge Holder
13. Blade Wrench
FIG. 3 HARDWARE
1. 1/4-20x2-1/4" Hex Head Screw (1)
2. M6x1x20mm Hex Head Screw (1)
3. 1/4-20x1/2" Hex Head Screw (2)
4. M6x1x12mm Flat Head Screw (1)
5. M4x.7x10mm Pan Head Screw (1)
6. M4x.2x10mm Pan Head Screw (4)
7. M8x1.25 Hex Nut (1)
8. M6x1 Wing Nut (1)
9. M4x0.7 Hex Nut (1)
10. M6.4 Flat Washer (3)
11. 1/4" Internal Tooth Lockwasher (1)
12. 1/4" External Tooth Lockwasher (5)
13. 3/16" Flat Washer (4)
14. 3/16" External Tooth Flat Washer (1)
FIG. 4 STAND PARTS
1. Leg (4)
2. 3/8" Flat Washer for Mounting Saw to Stand & for Assembling Stand (24)
3. Foot (4)
4. M8x1.25 Hex Nut for Mounting Saw to Stand & for Assembling Stand (20)
5. M8x1.25x45mm Hex Screw for Mounting Saw to Stand (4)
6. M8x1.25x20mm Carriage Head Bolts for Assembling Stand (16)
7. 18-1/2" Top Front and Rear Brackets (2)
8. 17" Top Side Brackets (2)
9. 22" Bottom Front and Rear Brackets (2)
10. 20-3/8" Bottom Side Brackets (2)
All manuals and user guides at all-guides.com
CARTON CONTENTS
39
Fig. 1
1 2
3 4
Fig. 2
7
1
8
2
3
9
4
5
6
Fig. 3
10 7
5
4
2
Fig. 4
8 13
9
11
10
12
5 6 7
10
11
12
13
14
1 8 9
3
6