Roger Technology H85/TTD Instrucciones Y Advertencias Para El Instalador página 24

4
Description
The H85
system comprises minimum 1 to maximum 4 H85/TTD numeric code keypads compatible with the H85/DEC interface
card, or minimum 1 to maximum 2 H85/TTD keypads compatible with the H85/DEC2
The H85/TTD
The numeric code keypad is available:
• H85/TTD/E: for wall mounting;
• H85/TTD/TRIX: for pillar mounting;
• H85/TTD/I: recessed
The interface card is available:
• H85/DEC/BOX: with IP54 outdoor box
• H85/DEC2/BOX: with IPX0 card holding base
5
Functionality of the H85/TTD keypad
The H85/TTD
It has two indicator LEDs, one green LV and one red LR (
Up to 500 user codes can be stored, each of which must have a minimum of 3 digits and a maximum of 6
6
Functionality of the H85/DEC - H85/DEC2 interface
The H85/DEC
the H85/DEC2 interface can handle a maximum of 2 H85/TTD
H85/TDS series keypads can be linked, provided that the total number of keypads linked is within the limits outlined in
7
Keypad installation for application with interface H85/DEC - H85/DEC2
Depending on the type of keypad selected (see
• Undo the securing screws and open the H85/TTD
•
• Make the electrical connections as shown in
2
• For use with the H85/DEC or H85/DEC2 interface, set DIP1, DIP2 and DIP3
•
• H85/TTD
8
Description of the H85/DEC interface contacts
CONTACT
1(0V) 2(12/24)
3(ENA) 5(COM) A timer or a key contact can be connected between terminals 3-5
4(SYNC) 5(COM)
8 OUT A
10 OUT B
12 OUT C
24 24
Select the power supply type with the jumper J1 (see
The function is only active if the jumper J2 is in the EXT
SYNC
9 Command output A
11 Command output B
13 Command output C
A)
H85/DEC or H85/DEC2 interface card, use
H85/DEC
, inset D
H85/TTD keypads, while