Roger Technology H85/TTD Instrucciones Y Advertencias Para El Instalador página 26

• WARNING! Set DIP1, DIP2 and DIP3 on the keypad H85/TTD to ON.
• Power on the H85/DEC
• Press and hold the PROG key on the H85/DEC
• The A, B, C, D
•
• PROG
• The green LV LED and red LR LED on the H85/TTD
• Press the # key 3 times (# # #
green LV
• H85/DEC interface, the A
• Proceed with the encoding of any other keypads (# # #)
• For 1, 2 or 3 encoded keypads, press PROG
• For 4 encoded keypads, the procedure ends automatically, after pressing the #
L1
WARNING! If the PROG key is released before 10 s have elapsed, the green L1 LED lights up and the acquisition
14
Keypad acquisition procedure on the H85/DEC2 interface
Plug and Play Mode.
H85/TTD
POWER ON
ON
• WARNING! Set DIP1, DIP2 and DIP3 on the keypad H85/TTD to ON.
• L1, A, B
• The green L1 LED
• If the keypad is detected, the L1 LED
• If the keypad is not detected, the L1 LED
Dual Keypad Mode.
H85/TTD keypads, or if installing a second keypad at a later time, the acquisition procedure is as
There are 2 indicator LEDs (A, B
15
ATTENTION!
1234
Example 1:
memorization of user code 34741, password 0000, enabling of all function keys 1/A, 4/B, 7/C, */D digit:
If the procedure is successful the green LV
Example 2:
memorization of user code 34741, password 0000, enable only function key 4/B digit:
If the procedure is successful the green LV
N.B.: if the password entered is correct, the red LR
26 26
L1, L2, A, B, C, D
L1
LED L1
STAYS LIT for 5 s
0000
L1 LED on the interface starts
L1
LED L1
BLINKS
RAPIDLY
0000
34741 # #
34741 # B #
(B...C...D)
The
1234 and password