EINHELL TE-TS 36/210 Li Manual De Instrucciones página 18

vention regulations in force in your area as
well as all other generally recognized rules of
safety.
30. Note the information published by your pro-
fessional associations.
31. Operators must be at least 18 years of age.
32. Never remove loose splinters, chips or jam-
med pieces of wood when the saw blade is
running.
33. To rectify faults or remove jammed pieces of
wood, always switch off the machine fi rst. –
Pull out the battery.
34. Persons working on the machine should not
be distracted.
35. Keep your workplace clean of wood scrap
and any unnecessary objects.
36. Before you use the machine for the fi rst time,
check that the voltage marked on the rating
plate is the same as your supply voltage.
37. Operate the saw only with a suitable vacuum
extraction system or a standard industrial va-
cuum cleaner.
38. Keep unused electric tools out of the reach of
children. Do not allow people who are not fa-
miliar with the tool or who have not read these
instructions to use the tool. Electric tools are
dangerous if they are used by inexperienced
people.
39. Keep your cutting tools sharp and clean.
Carefully maintained cutting tools with sharp
cutting edges will jam less and are easier to
control.
40. Have your tool repaired only by trained per-
sonnel using only genuine spare parts. This
will ensure that your tool remains safe to use.
41. All covers and safety devices have to be pro-
perly fi tted before the equipment is switched
on.
42. When working with wood that has been pro-
cessed before, watch out for foreign bodies
such as nails or screws etc.
43. Before you actuate the On/Off switch, make
sure that the saw blade is correctly fi tted
and that the equipment's moving parts run
smoothly.
44. Keep handles dry, clean and free from oil and
grease.
SAVE THESE INSTRUCTIONS
Anl_TE_TS_36_210_Li_USA_SPK7.indb 18 Anl_TE_TS_36_210_Li_USA_SPK7.indb 18
EN
2. Layout and items supplied
2.1 Layout
1. Saw table
2. Saw blade guard
3. Push stick
4. Blade
5. Riving knife
6. Table insert
7. Complete rip fence
8. Hand wheel
9. Locking lever for saw blade angle
10. Extension table
11. On/Off switch
12. Eccentric lever for rip fence
13. Rotary disk in table insert
14. Miter gauge
15. Screw for saw blade
16. Extractor adapter
17. Recessed head screw
18. Hole in riving knife
19. Fastening screw
20. Fastening plate
21. Slot in saw table
22. Main scale
23. Stop rail
24. Additional scale
25. Slot in stop rail
26. Knurled screw for rip fence
27. Washer for rip fence
28. Lock bolt for rip fence
29. Guide rail for rip fence
30. 10/13 mm ring wrench
31. 10/21 mm ring wrench
32. Adjustment screw (0°)
33. Adjustment screw (45°)
34. Stop rail for cross stop
35. Knurled screw for miter gauge
36. Locking screw for miter gauge
37. Dust collector
38. Cap on saw blade guard
39. Battery (not supplied)
40. Mount for battery
41. Emergency stop switch cover
42. Clamping lever for table width extension
43. Threaded sleeve
44. Nut
45. Suction hose (not included)
46. Adapter (not included)
47. Battery capacity indicator
48. Battery capacity indicator button
- 18 -
07.10.2022 09:39:58 07.10.2022 09:39:58