Publicidad
Idiomas disponibles
Idiomas disponibles
1.5 Installing the Front and Rear camera
The front and rear cameras can be loosened by
EN
EN
the hexagonal screw to adjust the camera
recording angle, as well as the recording direction.
Camera mount holder head cap screws: loosened,
you can adjust the camera angle up and down,
can be inverted, side-mounted rotation to adjust
the direction of the camera recording.
Camera
holder
3M adhesive
for camera
holder
Note:
<1>. If the front camera is mounted on the
handlebar position, you need to fix the front
camera to the multifunctional camera holder first,
and then fix the holder on the motorcycle
handlebar.
<2>. The front/rear cameras comes with 3M
adhesive, just stick it in the front/rear of the
motorcycle after choosing the right position.
- 5 -
Camera
orientation
correction line
Multifunctional
camera holder:
fixing screw holes
Multifunctional
camera holder:
can be mounted
on motorcycle
handlebars and
other locations
Publicidad
