Main Features; Front Panel - DJ-Tech i-Mix Reload MKII Manual De Instrucciones

MAIN FEATURES

Plug and Play USB MIDI Controller
High resolution pulse sensor touch sensitive Jog Wheels for Pitch Bending and Scratching.
Adjustable Crossfader curve.
Built-in 2-in 2-out Audio Interface
Maximum 0.9V RMS Line Output
1 MIC, 2 Line Inputs, 2 Line Outputs and 1 Phone Output.
Power LED for power and MIDI activities indication
Powered by USB or external DC adaptor
ASIO Audio Driver included for Windows XP/ Vista and Mac
CONNECTION
1
MIC INPUT JACK – This jack is used to connect a microphone to the device. Connect you microphone via
1.
1/4-inch (6.3mm) jack.
MIC LEVEL CONTROL – This knob is used to adjust the output volume of microphone. Turn the knob in
2.
clockwise direction to increase the microphone volume.
MIC TONE CONTROL – This knob is used to adjust the tone of microphone between Low and High. In the
3.
center position, the tone control is middle.
MASTER LEVEL CONTROL – This knob is used to adjust the output volume of master. Turn the knob in
4.
clockwise direction to increase the master volume.
MONITER LEVEL CONTROL – This knob is used to adjust the output volume of headphone. Turn the
5.
knob in clockwise direction to increase the headphone volume.
Always be sure the MONITOR LEVEL is set to minimum before putting the headphones on.
MONITOR JACK - This jack is used to connect your headphones to the device allowing you to monitor the
6.
cue source.
2 3 4 5
2

FRONT PANEL

6