Descargar Imprimir esta página

Hilti C 53 Manual De Instrucciones página 10

Ocultar thumbs Ver también para C 53:

Publicidad

Idiomas disponibles

Idiomas disponibles

7
Transport and storage
▶ After transporting, always check all visible parts and controls for signs of damage and make sure that
they all function correctly.
▶ After a long period of storage, always check all visible parts and controls for signs of damage and make
sure that they all function correctly.
▶ Do not store the product in a potentially explosive environment.
▶ Always store this product with the electric supply cable unplugged from the electricity supply.
8
Troubleshooting
If the trouble you are experiencing is not listed in this table or you are unable to rectify the problem by
yourself, contact Hilti Service.
Malfunction
Power-in indicator shows
steadily, fault indicator shows
steadily
Power-in indicator shows
steadily, fault indicator
flashes
Power-in indicator and fault
indicator flash
AC supply fuse or automatic
fuse trips
9
Disposal
Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The
materials must be correctly separated before they can be recycled. In many countries, your old tools,
machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative
for further information.
▶ Do not dispose of power tools, electronic equipment or batteries as household waste!
6
English
Possible cause
Fault in the charger
Fault in the welding machine
Fault in the electricity supply (over-
heating or overvoltage)
Fuse in AC supply too weak /
wrong automatic fuse
AC supply fuse trips in no-load
operation.
Action to be taken
▶ Contact Hilti Service.
▶ Contact Hilti Service.
▶ Unplug the supply cord from the
power outlet and disconnect the
charging cord from the charger.
▶ Check the supply voltage from
the electricity supply.
▶ Unplug the supply cord from the
power outlet and disconnect the
charging cord from the charger.
▶ Use fuses of correct ampere
ratings.
▶ Unplug the supply cord from the
power outlet and disconnect the
charging cord from the charger.
▶ Consult Hilti Service.
2302422
*2302422*

Publicidad

loading