Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY INFORMATION
Some of the following symbols may be used on this tool. Please study them and their meaning.
Proper interpretation of these symbols will allow you to operate the tool better and more safely.
SYMBOL
DEFINITION
V
Volts
Direct current
A danger, warning, or caution.
It means 'Attention! Your safety
is involved.'
IMPORTANT SAFETY INSTRUCTIONS
WARNING
• When using electric trimmers, basic safety precautions should always be followed to reduce
the risk of fire, electric shock, and personal injury, including the following:
READ ALL INSTRUCTIONS
DANGER
• Do not rely on the tool's insulation against electric shock. To reduce the risk of electrocution,
never operate the tool in the vicinity of any wires or cables which may carry electric current.
CAUTION
• Avoid dangerous environments - Don't use appliances in damp or wet location.
• Don't use in rain.
• Keep children away - All visitors should be kept at least 100 ft. (30.5 m) away from work
area.
• Dress properly - Do not wear loose clothing or jewelry. They can be caught in moving parts.
Use of rubber gloves and substantial footwear is recommended when working outdoors.
Wear protective hair covering to contain long hair.
• Use safety glasses. Always use face or dust mask if operation is dusty.
• Use the right appliance - Do not use the tool for any job except that for which it is intended.
• Don't force the appliance - It will do the job better and with less likelihood of a risk of injury
at the rate for which it was designed.
• Don't overreach - Keep proper footing and balance at all times.
• Stay alert - Watch what you are doing. Use common sense. Do not operate the appliance
when you are tired.
• Keep guards in place and in working order.
• Keep hands and feet away from the cutting area.
• Store idle appliances indoors - When not in use, the appliances should be stored indoors
in a dry and high or locked-up place out of reach of children with the battery pack removed.
• Maintain appliance with care - Keep cutting edge sharp and clean for best performance
and to reduce the risk of injury. Follow instructions for lubricating and changing accessories.
Keep handles dry, clean, and free from oil and grease.
SYMBOL
DEFINITION
n
No-load speed
0
RPM
Revolutions per Minute
To reduce the risk of injury, user
must read instruction manual.
5
Publicidad
