Allen + Roth LWS0944A 0336765 Manual De Instrucciones página 5

ASSEMBLY INSTRUCTIONS
3. Attach ground fixture wire to either the green
ground screw (AA) on crossbar (A) or to the
ground wire in the outlet box (usually GREEN or
BARE). If attaching fixture ground wire to the
crossbar (A), it is imperative the outlet box in
your home be properly grounded. Connect the
neutral WHITE or RIBBED side fixture wire to the
neutral usually WHITE wire from the outlet box.
Connect the hot BLACK or SMOOTH side fixture
wire to the hot usually BLACK wire from the
outlet box. Fasten wires together with a wire
connector (BB) and tightly wrap connector with
electrical tape.
Hardware Used
Green
AA Ground
Screw
Wire
BB
Connector
4. Carefully tuck all wires into the outlet box and
position the ceiling canopy (B) over the outlet
box. Align the holes in the backplate of the
ceiling canopy (B) with the mounting screws
(CC). Pass the ceiling canopy (B) over the
mounting screws (CC) and secure by threading
mounting balls (FF) onto the ends of mounting
screws (CC). Tighten until snug.
Hardware Used Hardware Used
FF Mounting Ball
5. Install bulbs (E).
3
From Outlet Box
From Outlet Box
From Outlet Box
From Outlet Box
x 1
x 3
6 6 4
x 2
6 6 5
E
5
BB
Ribbed Side
White Wire
From Fixture
Smooth Side
Black Wire
From Fixture
Bare, or Green
Bare, or Green
Ground Wire
Fixture Ground Wire
OR
Bare, or Green
Ground Wire
B
B
Lowes.com/allenandroth
White or
Black or
AA
Outlet
Box
CC
FF
A