Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
6. Place the shade (C) inside of the cage (D). Lift
the assembly upward, placing the bolts in the
cage (D) into the slot on the side of the ceiling
canopy (B). Rotate the assembly until it is
engaged in the slots.
CARE AND MAINTENANCE
Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives
to clean fixture as they may damage the finish.
Bulb Replacement: Use two 18-watt max. CFL spring self-ballasted GU24-base bulbs.
TROUBLESHOOTING
PROBLEM
Bulbs will not light.
Fuse blows or the
II
circuit breaker trips
when light is turned
on.
POSSIBLE CAUSE
1. Bulb is burned out.
2. Power is off.
3. Faulty wire connection.
4. Faulty switch.
Crossed wires or power wire is
grounding out.
6 6 6
B
CORRECTIVE ACTION
1. Replace light bulb.
2. Make sure power supply is on.
3. Check wiring.
4. Test or replace the switch.
Check wire connection.
Lowes.com/allenandroth
6
C
Bolt
D
Publicidad
