Descargar Imprimir esta página

Cooper Lighting Solutions Greengate RC3 Instrucciones De Instalación página 9

Publicidad

Idiomas disponibles

Idiomas disponibles

Greengate
If you have a larger room that requires two occupancy
sensors, the second sensor's input/output device may
attach directly to the first sensor's input/output device or
may be routed to the second sensor Click & Go port on the
Room Controller.
Blue
Red
Black
Brown
OCC-RJ45
(Input/Output Device)
QuickConnect Cable
(Class 2)
Blue
Red
Black
Brown
OCC-RJ45
(Input/Output Device)
6
Switchpack
White
Red
Receptacle
BMS/Out
5
Black
Sensors
Green
Sensors
Slider
Station
4
Wallstations
-
A/V
Mode
+
-
3
Demand
Response
+
-
Alert
+
Mode
-
Time
+
Clock
2
1
Energy Options DIP Switch
Demand Response
Occupancy
Not Used
1 2
3
4
Default 10%
Occ
20%
Vac (default)
30%
40%
0-10V Dimming Outputs
-
-
-
+
+
+
Dimmer 3
Dimmer 2
Dimmer 1
-
-
-
Dimmer 3
+
Dimmer 2
+
Dimmer 1
+
0-10V Dimming
Daylight Sensor / IR Receiver
The Room Controller connects to one daylight sensor
for multi-zone dimming control in the RC3D and RC3DE
models.
Specifications
Voltage
Electrical
Light Sensor Range
Low:
High:
Direct Sun:
Connections
Operating Environment
9850-000362-06 page 9
October 2022
Blue
Red
Black
Brown
OCC-RJ45
(Input/Output Device)
6
Switchpack
White
Receptacle
Red
BMS/Out
5
Black
Sensors
Green
Sensors
OR
Slider
Station
4
Wallstations
-
A/V
+
Mode
-
Demand
3
+
Response
-
Alert
Mode
+
-
Time
Clock
+
2
1
Energy Options DIP Switch
Demand Response
Occupancy
Not Used
1 2
3
4
Default 10%
Occ
20%
Vac (default)
30%
40%
0-10V Dimming Outputs
-
-
-
+
+
+
Dimmer 3
Dimmer 2
Dimmer 1
Dimmer 3
-
Dimmer 2
-
Dimmer 1
-
+
+
+
0-10V Dimming
QuickConnect Cable
(Class 2)
Blue
Red
Black
Brown
OCC-RJ45
(Input/Output Device)
24 VDC supplied from Room
Controller
Class 2, LPS
3-300 lux
30-3000 lux
300-30000 lux
Sensor has a Click & Go ready
connector to a provided
GGRC-COUPLER.
32° F to 104° F (0° to 40° C)
For indoor use only.
Mounting
The daylight sensor can be mounted to a ceiling tile or fixture
using the threaded post and locking washer in materials up to a
0.75" thick. The accessory mounting bracket (DSCM-MT) allows
the daylight sensor to be mounted to a hard wall.
Ensure the daylight sensor is not obstructed and is not looking
directly at electric lighting
For skylights that contain motor controls, ensure the daylight
sensor is mounted below the daylight blocking mechanism
Remember to adjust the sensor head to point the arrow and
lens in the correct position
Ensure the daylight sensor is not looking out the window or
skylight
Functions
The daylight sensor adjusts the light level in the space based
on natural light. The daylight sensor is an open loop sensor that
controls all three zones in the Room Controller. Out-of-the-box
the Room Controller and daylight sensor provide three daylight
dimming levels for primary, secondary and top lighting. The out-
of-the-box daylight levels target approximately 45 fc at the work
surface across the space depending on room size and fixture
spacing.
The daylight sensor also acts as an IR receiver for the HHPR-RC
personal remote and is required if the space needs an IR personal
remote.
Room Controller wallstations allow the user to lower the light level
below the daylight level setting. The Room Controller wallstations
will never allow the light level to be raised above the daylight level
setting.
Mount the daylight sensor
For narrower spaces
one to two times the
mount the daylight
sensor near the window
window height from the
window wall. Position the
with the sensor lens and
sensor so its lens and
arrow facing away from
the window and pointing
arrow is pointed toward the
into the space.
window.
60°
Area Viewed By
Daylight Sensor
Ceiling Location
Narrow Location
Locking Washer
Daylight Sensor
Viewing Lens
Room Controller
Area Viewed By
Daylight Sensor
60°
60°
For skylights mount the
daylight sensor on the south
wall of the skylight well so
that the lens is aimed at the
north wall, with the arrow and
Area Viewed by
lens pointed up.
Daylight Sensor
Skylight Location
Sensor Cable to Coupler
(GGRC-COUPLER)
Threaded
Mounting Post
Ceiling
Adjustable Daylight
Sensor Dome
www.cooperlighting.com

Publicidad

loading