Publicidad
Idiomas disponibles
Idiomas disponibles
TOOLS
1
Camshaft Locking Tool, to be used as OEM T40070
2
Crankshaft Pulley Holding Tool, to be used as OEM T10355
3
Chain Tensioner Locking Tool, to be used as OEM T40071
4
Camshaft Locking Tool, to be used as OEM T40133
5
Setting Wrench for Camshaft Adjuster, to be used as OEM T40269
6
Setting Wrench for Camshaft Adjuster, to be used as OEM T40079
7
Crankshaft Rotating Tool, to be used as OEM T40058
8
XZN Bit Socket 14 mm, length 45 mm, to be used as OEM T10035
9
XZN Bit Socket 14 mm, length 80 mm
10 Crankshaft Locking Pin, to be used as OEM T40069
11 Crankshaft Locking Pin, to be used as OEM T3242
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.
INTENDED USE
This engine timing tool set is used for checking and setting the engine timing on VAG 2.4 / 2.8 / 3.0L
petrol engines.
More information regarding this item and a list of suitable engines and models can be found on our
website:
www.bgstechnic.com
SAFETY INFORMATIONS
•
Keep children and other persons away from the working area.
•
Do not allow children to play with this tool or its packaging.
•
Do not use the tool if parts are missing or damaged.
•
Use the tool for the intended purpose only.
•
Never place the tool on the vehicle battery. There is a risk of a short circuit.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Engine Timing Tool Set
for VAG 2.4 / 2.8 / 3.0L Petrol
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 74313
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicidad
