Defiant DF-6019-WH-B Guía Para El Uso Y Cuidado página 7

Operation (continued)
5
Adjusting the ON-TIME Switch
on the Motion Sensor
The "ON-TIME" switch determines the amount of time
the light will stay on full bright after all motion has
stopped.
Set the "ON-TIME" switch to the 1 or 5 minute
position.
ON-TIME
(MINUTES)
5 1 TEST
7
Adjusting the Bypass Switch
on the Plug-In Control
The bypass switch determines if the plugged-in light
will be controlled by the motion sensor (A) or operated
manually.
Set the bypass switch to "AUTO" for the light to
be controlled by the motion sensor (A).
Set the bypass switch to "MANUAL" for the
light to be controlled manually.
Care and Cleaning
To prolong the original appearance, unplug or remove the batteries and clean with a soft, lightly dampened
cloth only.
Do not use paints, solvents, or other chemicals on these products. They could cause a premature deterioration
of the nish. This is not a defect in the nish and will not be covered by the warranty.
Do not spray with a hose or power washer.
A
B
6
Adjusting the DETECT Switch
on the Motion Sensor
The "DETECT" switch determines what time of the
day the motion sensor (A) will turn the light ON when
motion is detected. The "DETECT" switch is located in
the battery compartment. Remove the batteries to set
this switch.
Set the "DETECT" switch to NIGHT ONLY or
DAY/NIGHT (24 hour operation).
DAY NIGHT
NIGHT ONLY
DETECT
8
Adjusting the Volume on the
Plug-In Control
The alarm sounds when the plug-in control (B) is
activated by the motion sensor (A). The volume of the
alarm can be increased or decreased as desired.
Turn the volume thumbwheel up to increase
the volume or down to decrease the volume.
7
Please contact 1-866-308-3976 for further assistance.
A
B
HOMEDEPOT.com