AEG MSB2057D-B Manual De Instrucciones página 27

separately: These lamps are intended
to withstand extreme physical
conditions in household appliances,
such as temperature, vibration,
humidity, or are intended to signal
information about the operational
status of the appliance. They are not
intended to be used in other
applications and are not suitable for
household room illumination.
3. INSTALLATION
WARNING!
Refer to Safety chapters.
3.1 Electrical installation
WARNING!
Only a qualified person must
do the electrical installation.
The manufacturer is not
responsible if you do not
follow the safety precautions
from the chapter "Safety
Information".
This microwave is supplied with a main
cable and main plug.
The cable has an earth wire with an
earthing plug. The plug must be plugged
into an outlet that is properly installed
and earthed. In the event of an electrical
short circuit, earthing reduces the risk of
electric shock.
3.2 Installation - preliminary
preparation
To install the microwave in a cupboard
with dimensions as specified below,
remove the 4 screws and the bracket
from the bottom of the appliance.
2.6 Disposal
WARNING!
Risk of injury or suffocation.
• Disconnect the appliance from the
mains supply.
• Cut off the mains electrical cable
close to the appliance and dispose of
it.
600 mm
560+8 mm
18 mm
min.
300 mm
362 +3 mm
Follow the steps below, starting from
number 1.
To install the microwave in a cupboard
with dimensions as specified below, no
modification is needed.
ENGLISH 27
4x