Descargar Imprimir esta página

Cartrend 11158 Instrucciones De Uso página 33

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 71
Attention!
Observe and check the firmness of the item whilst inflating. If the item has
already been overinflated, immediately interrupt the process and switch
the compressor off! Attention! Excessive air pressure may cause the item
to burst! Risk of personal injury and property damage!
7. Remove the valve adapter from the item's valve and close the item's
valve cap.
Non-binding pressure guidelines
Object
Automotive tyre
Trailer tyre
Motorcycle tyre
Bicycle tyre
Football
Using the 12 V car socket
1. Set the dial [6] to "ON".
2. Connect the plug of an external device to the 12 V car socket [3].
3. After using the external device, disconnect the 12 V car plug from the
12 V car socket.
4. Set the dial [6] to "OFF".
Using the 2.0 USB output socket
1. Press the button [5] to switch on the USB port [4].
2. Plug an external USB device to the USB port [4].
The USB port delivers 5 V of direct current for external USB devices (e.g.
lamps, fans, radios).
Note:
• The USB port is not intended for data transfer.
• Do not connect memory sticks, MP3 player or similar data storage
external appliances.
3. Press the button [5] again to switch off the USB port [4].
EN
Original Operating Instructions
Pressure
approx. 1.9 - 3.5 bar
approx. 2.4 - 3.4 bar
approx. 1.7 - 2.9 bar
approx. 2.0 - 4.0 bar
approx. 0.6 - 1.1 bar
33

Publicidad

loading

Productos relacionados para Cartrend 11158