Publicidad
Idiomas disponibles
Idiomas disponibles
2.2.
Safety in the workplace
a)
Keep the work area tidy and well lit. Disorder or poor lighting can lead to
accidents. Be foresighted, watch what you are doing and use common sense
when using the unit.
b)
If you find any damage or irregularities in the operation of the unit,
immediately turn it off and report it to an authorized person.
c)
If you have any doubts as to whether the product is working properly or if it is
damaged, contact the manufacturer's service department.
d)
Only the manufacturer's service department can repair the unit. Do not carry
out repairs yourself!
e)
In case of open flames or fire, use only dry powder or snow (CO2) fire
extinguishers to extinguish the live equipment.
f)
Check the condition of the safety stickers regularly. Replace them if they are
illegible.
g)
Keep these instructions for use for future reference. If the unit is to be passed
on to a third party, the operating instructions must also be handed over
together with the unit.
h)
Keep the packaging and small assembly parts out of the reach of children.
i)
Keep the unit away from children and animals.
Please note! Keep children and other bystanders safe while operating
the unit.
2.3.
Personal safety
a)
The unit is not intended to be used by persons (including children) with
reduced mental, sensory or intellectual functions or persons who lack
experience and/or knowledge unless they are supervised or have been
instructed by a person responsible for their safety on how to operate the unit.
b)
To prevent accidental start-up, make sure the switch is in the off position
before connecting to a power source.
c)
The unit is not a toy. Children should be watched to ensure that they do not
play with the unit.
d)
Do not place your hands or any objects inside the running unit!
2.4.
Safe use of the unit
a)
Do not overload the unit. Use tools that are suitable for the application. A
correctly selected unit will do a better and safer job for which it was designed.
b)
Do not use the unit if the ON/OFF switch does not function properly (does not
turn on and off). Units that cannot be controlled by the switch are unsafe,
cannot operate, and must be repaired.
Publicidad
