Elta 6925 Manual De Instrucciones página 26

5. To listen to your recording, press the cassette REWIND button until the start
point of the recording is reached and then press the PLAY button. Use the
VOLUME control to adjust the playback level to your personal taste.
Note: On each end of the tape, there is a tape leader and no recording will take
place over this portion of the tape. If you wish recording to take place as soon as
the RECORD button is pressed, please ensure that the leader is winded past the
record head.
TO RECORD FROM A COMPACT DISC
1. Slide the FUNCTION switch to the CD position.
2. Load a cassette into the cassette compartment with the full reel on the right.
3. Insert the compact disc from which you wish to record and close the CD
door.
4. Press the cassette PAUSE button on the tape deck.
5. Press the cassette RECORD and PLAY buttons, so they lock in the down
position. (The unit is now in recording standby mode)
6. Start the CD playing by pressing the CD PLAY/PAUSE (
7. Press the cassette PAUSE button again and then recording begins.
8. To end the recording, press the cassette STOP/EJECT button.
9. Press the CD STOP ( ) button and then move the FUNCTION switch to the
TAPE position.
10. To listen to your recording, press the REWIND button to return to the point
where the recording started and then press the PLAY button.
TO RECORD FROM THE BUILT-IN MICROPHONE
1. Set the FUNCTION Switch to the TAPE position.
2. Load the cassette, which you wish to record on into the guides on the
cassette door. (Full reel on the right hand side).
3. Press the cassette RECORD button and speak into the BUILT-IN
MICROPHONE on the top right of the unit.
4. Press the STOP/EJECT button to end the recording.
5. Rewind the tape and then press the PLAY button to listen to your recording.
TO ERASE A TAPE
1. Set the FUNCTION switch to the TAPE position.
2. Press the cassette RECORD button. Any recording, which was present on
the tape will be erased. (During this process, take care that ambient sound is
not recorded through the built-in microphone).
) button.
- 49 -
CD OPERATION AND HANDLING A DISC
CARE AND HANDLING OF COMPACT DISCS
In order to achieve a long trouble free performance from your compact discs,
please observe the following points.
When handling the CD, take care not to touch the playing
surface, hold the disc by its outer edge.
Do not expose the disc to direct sunlight, high temperature
or dusty environments.
Do not stick labels onto the disc or write on them with a ball
point pen or anything not specifically suited to the purpose.
Clean the disc by wiping from the center outwards, never
use a circular motion.
Use a clean dry cloth. Do not use any type of cleaning
agent or solvent.
When not in use, store them in their original protective
cases.
PLAYING A CD
1. Make sure the power is connected, slide the FUNCTION switch to CD/MP3
position.
2. Load a disc into the CD compartment. Close the CD door, the disc will begin
to spin, and unit begins reading the disc.
3. Adjust the VOLUME control to the desired volume level.
4. To stop playing temporarily, press the CD PLAY/PAUSE button.
• The elapsed time of the current track will flash on the display.
• Resume to normal play by pressing PLAY/PAUSE button again.
5. To stop playing, press the STOP button. The total tracks' number and whole
playing time will be shown on the display.
6. To turn off the player, slide the FUNCTION switch to TAPE position.
TRACKS SKIPPING
Press the SKIP/SEARCH UP and DOWN buttons during play to skip to the
desired track.
1. Press the button to skip to the next track on the disc.
2. Press the button once to skip to the beginning of the track currently
playing.
3. Press the button twice or more to skip to previous tracks.
- 50 -