Publicidad
Idiomas disponibles
Idiomas disponibles
☛ Press and hold ALBUM/10+ button during MP3 playback, the Album No on
the LCD will flicker for your selection of the desired album. You may use the
CD SKIP buttons to make your selection. After that press Play/Pause button
to begin music playback from the first track of the selected album. Skip to
the desired track of the chosen album by means of the 10+ or SKIP buttons.
REPEAT PLAYING FUNCTION
SINGLE TRACK REPEAT
In stop mode or playing mode press the CD MODE button once to repeat current
playing track, display shows "REPT 1" (In stopping mode pressing the
PLAY/PAUSE Button again is required.) .
SINGLE ALBUM REPEAT
In playing mode or stop mode, press the CD MODE button twice, the whole
tracks of the current album will be repeated, display shows "REPT DIR" (In
stopping mode pressing the PLAY/PAUSE Button again is required.) .
WHOLE DISC REPEAT
In playing mode or stop mode, press the CD MODE button thrice, the whole
disc's tracks would be repeatedly playing, display shows "REPT
stopping mode pressing the PLAY/PAUSE Button again is required.) .
INTRO SCAN MODE
Press the CD MODE button four times in stop mode or playing mode, "INTRO"
appears on the display. Press the PLAY/PAUSE button again to enter intro scan
mode (the first ten seconds of each track on the disc will be played in normal
sequence). When the desired track is reached, you press Play/Pause to cancel
Intro and enter normal playback of this track.
RANDOM PLAY
Press the CD MODE button five times in stop mode or playing mode,
"RANDOM" appears on the display. Press PLAY/PAUSE button again to start
the random playback.
PROGRAM PLAY (up to 20 tracks can be edited)
NOTE: This can only be done during stop state.
1. While the unit being in stop mode, press PROGRAM button.
2. Press the SKIP/SEARCH buttons to select the desired album.
3. Press PROGRAM button to confirm your selection.
ALL" (In
-
53 -
4. Press the SKIP/SEARCH buttons to select your required tracks.
5. Repeat the above steps to program the other tracks.
6. Press PLAY/PAUSE button to enter programmed play.
To exit Programmed playback, press Stop button once. In Stop mode, you may
clear the Programming memory by pressing Stop button once again.
BASS BOOST BUTTON
Press this button to turn on or off Bass boost system.
LCD DISPLAY (SUPPORT ID TAG)
ID TAG information: For playing some MP3 disc with ID TAG information, the
LCD display can show part of song informations.
Operations of the remote controller (optional):
There are a total of 32 keys on the remote controller. Radio operation is not
available on the remote controller.
POWER BUTTON
This button can set the main unit to the STAND BY mode after the power supply
is connected by means of pressing down the POWER BUTTON. Press this
button again in the STAND BY mode, the main unit is in POWER-ON mode
again.
MUTE BUTTON
Press this button during CD/MP3/TAPE/RADIO operation/broadcasting, the
audio output of the unit is made silent; you can press this button again to return
to normal.
RANDOM BUTTON
Press this button during CD/MP3 playback or in CD/MP3 stop mode, the unit will
begin RANDOM playing immediately. Please this button once again to cancel
random mode.
CD EQ BUTTON
Press this button continuously in DISC play mode to choose the desired sound
effect among: NORMAL, DBB, POP, CLASSSIC, JAZZ, ROCK.
-
54 -
Publicidad
