Descargar Imprimir esta página

Titan T750 Guia Del Usuario página 7

Publicidad

Idiomas disponibles

Idiomas disponibles

TROUBLESHOOTING
Low suction or poor pick up
Possible causes
1. Disposable dust bag is full
2. Wand is not properly installed
3. Tool not working properly
4. Air path obstructed
Vacuum motor is not working
Possible causes
1. Vacuum is not plugged in
2. Electrical outlet is not working
3. Motor thermal protector activated
due to blockage
4. ON/OFF switch faulty
5. Motor defective
WARNING:
Remedies
1. Dispose current disposable bag and replace
with new bag
2. Secure wand properly to ensure there are no air
leaks
3. Make sure tool is on the wand properly and
tightly
4. Check for any air flow obstructions
Remedies
1. Check to make sure vacuum is plugged in properly
2. Check electrical source
3. Allow the T750 to cool down, then check the
vacuum ducts and filter for blockage
4. Contact an authorized technician
5. Contact an authorized technician
7
To reduce the risk of fire,
electric shock, burn, or injury, turn
power OFF and disconnect
plug from electrical outlet
before performing maintenance
or troubleshooting.

Publicidad

loading