omisa WeldControl 160 Manual De Uso página 64

which the format of the output file with the welding re-
ports can be selected: a PDF file with an abstracted or ex-
tended version of the report or the format of the welding
data management application DataWork. Using the ñ and ò
arrow keys, select the file type you need and confirm your
selection by pressing the START/SET key.
The Service Report option is not important for normal op-
eration. In the scope of computer-assisted service, this re-
port lists events related to the maintenance of the welding
system.
5.2 Downloading All Reports
After the file type was selected, the next screen offers a
"Print All Reports" option. Selecting it will download all
welding reports currently in system memory in the previ-
ously selected file format.
5.3 Downloading by Commission Number, Date or Report
Range
After the file type was selected, the next screen offers a "By
Commission Number," a "By Date Range," and a "By Report
Range" options. Depending on the selection, the ñ and ò
arrow keys can be used to select from the commissions cur-
rently in system memory the desired one, of which the re-
ports should be downloaded, or all the arrow keys can be
used to enter a start date and an end date, or the first and
the last report, that define a range of dates or a range of
reports of which the reports should be downloaded. When
you press the START/SET key, you cause the selected reports
to be transferred to the storage media.
5.4 Understanding the Report Download Process
The download starts automatically after a selection was
made among the options. Wait for all the selected reports
to transfer and the "Download completed" message to ap-
pear on the screen.
If a problem occurs while the download is in progress, a
"Not ready" message shows. After the problem condition is
cleared, the download resumes automatically.
If the welding unit recognizes a problem that can-
not be cleared while the data transfer is in prog-
ress, it does not resume the process and displays a
Info
"Download cancelled" error message. To acknowl-
edge this error, press the START/SET key.
32
EN
Weld Control 160 User's Manual
O . M . I . S . A . S r l
Via Verga 9/11
20845 Sovico (MB), Italy
Version November 2022_1