Publicidad
Idiomas disponibles
Idiomas disponibles
CLOCK SETTING
Tip: When programming the time valve, please turn off the tap to avoid getting wet.
1. Turn the dial to the SET CLOCK.
2. Using the „+" button to set the day of the week and press „OK" to confirm.
3. Then using the „+" button to set the current time (hold the button to quickly increase the time)
4. Holding the „OK" button to switch time display of 12 H/24 H mode.
the figure below shows the current time at 10:20 on Friday
START TIME
1. Turn the dial to START TIME.
2. Press "OK" button to set the start watering time of three plans, hold the "OK" button to switch
plan setting quickly. Press "+" to increase the figure.
3. After setting the figure, press "OK" again to confirm the figure of it.
the figure below shows the start watering time of Plan 1 - 10:20 in the morning.
HOW LONG
1. Turn the dial to HOW LONG to set the water duration of the three plans.
2. Press "OK" button to select Hours and Minutes of the plans, or hold the "OK" button to switch
and set the next plan.
3. Press "+" to set the plan. The duration of hours is between 0 and 3 hours and for the minutes
is 0 to 59 minutes.
The figure below shows the watering duration time is 1 hour and 58 minutes.
HOW OFTEN
1. Turn the dial to HOW OFTEN to set weekday plan or the interval watering plan.
2. Press "+" button to select any day of the week or "Every" interval time. It can select any day
from Monday to Sunday, or set the interval of irrigation days.
3. Press "OK" to confirm the day of week for watering when the
needed.
4. Press "OK" to set the plan of interval when
5. Press "+" to set. (Can only choose either weekday plan or interval plan).
The figure below shows watering every Sunday, Wednesday, Thursday and Friday, one time a
day,interval time 24 hours.
flashing on "Every", and it can be set for 2 to 6 days.
4
symbol flashing on the day
Publicidad
