Emos ESI2001 Manual De Instrucciones página 6

The figure below shows the setting of the interval plan for 2 days. The plan will work every 2 days.
VIEW SET
1. Turn the dial to VIEW SET. It will show the setting the three plans.
2. Press "OK" button to check the Start time, How long and How often setting of the three plans.
PROGRAM RUNS AUTOMATICALLY
Turn the dial to "ON" to activate all the setting and plans.
When turn off all the watering plan, the screen shows the clock time.
Disabling a program is done by clicking on the "start time" menu until "OFF" appears on the screen.
When the watering plan is running, the screen will show the remaining watering time and the water
drop symbol will flash.
When plans are being set but not running yet, the screen will show the
Next irrigation time and Clock time alternately.
MANUAL/HAND WATERING
1. Turn the dial to "ON" and hold the "OK" button to start manual mode, it will start water manually
by 10 minutes.
2. Hold "OK" again to stop watering immediately.
Tip: The manual water mode does not change the set plan.
Battery low power display function
When the battery power is lower than 2.7 V,
but the system can still work normally for 4 weeks. When the battery voltage is lower than 2.6 V,
the icon flashes, the timer will stop irrigation plan, and close solenoid valve to protect the battery
from overdischarge. After replacing the batteries, the previously planned settings are still retained.
icon will be shown to indicate the low battery power,
5