Publicidad
Idiomas disponibles
Idiomas disponibles
6. Transferring Your Result Data
You can transfer test results from the adia meter to a computer.
You can download the software (German / English) from the following website
"www.diabetiker-bedarf.de/downloads".
The computer cable is sold separately and you can purchase it from your local
representative.
7. Battery Installation
The low battery icon
will appear in the upper left corner of the LCD
display to alert you when the battery power is running low, which is an
indication that a new battery is needed.
Your adia blood glucose test meter uses only one 3V lithium battery
(CR2032), which is included. When replacing battery, only CR2032
or equivalent lithium battery should be used.
Please always insert the batteries into the battery
compartment with the writing facing up.
Please recheck your meter settings after changing
the batteries.
Follow-up Action
1. Check your meter with the glucose control solution.
2. Perform your test again.
3. If you are experiencing symptoms that are not consistent with your
blood glucose test results, call your healthcare professional.
Note
1. Make sure your date and time are correct after changing your battery.
2. Please recycle or dispose of used batteries using your local battery
collection systems and in compliance with your local environmental
laws and regulations.
3. Caution risk of explosion if battery is replaced by an incorrect type.
Publicidad
