Amemo A320 Manual Del Usuario página 13

2.4 Expected Service Life
Is dependent on:
The expected service life of the ME equipment;

The expected service life of parts or accessories shipped with the

ME equipment;
Where the shelf life is less than the expected service life, the shelf

life of parts or accessories shipped with the ME equipment.
3 Installation,Setup and Operation
3.1 OLED display parameter setting
When the device is in the measuring interface, press the direction
button for 1 second in order to enter the menu page (figure 3.1.1 and
figure 3.1.2). There are two sub-menus.
3.1.1 Reminder Setup
Press the direction button for 1 second and enter the Reminder Setup.
User can adjust the setting through moving the "*" symbol to the
Sound Reminder, Beep, Restore or Brightness.
Sound reminder

Press the direction button for 1 second, move the "*" symbol to the
"Sound Reminder", long press the direction button to turn the alarm
sound on/off.If the measured value exceeds the maximum or
minimum value of SPO2 or PR, there will be an alarm sound, if this
function is turned on.
Beep

Press the direction button for 1 second, move the "*" symbol to the
back of "Beep", long press the direction button to turn the beep sound
on/off. When the beep is turned on, the sound emitted during the test
indicates the pulse rate.
10