Princess 282600 Manual De Instrucciones página 15

3. POWER button
4. START/STOP button
5. TIMER button
6. Mixing indicator (green)
7. Cooling indicator (red)
8. Fixed bowl
9. Removable bowl
10. Seal ring
11. Mixing arm
12. Bowl lid
13. Bowl lid cover
14. Motor unit
15. Measuring cup
16. Measuring spoon
Package contents
•
Ice-cream maker
•
Removable bowl
•
Mixing arm
•
Bowl lid
•
Bowl lid cover
•
Motor unit
•
Seal ring
•
Measuring cup
•
Measuring spoon
Initial use
Preparation
•
Clean the appliance.
Refer to "Cleaning and maintenance".
•
Clean the accessories.
Refer to "Cleaning and maintenance".
Assembly
Warning!
- Before assembly, always switch off the
appliance and remove the mains plug from
the wall socket.
- Before mounting the removable bowl into
the fixed bowl, make sure that the outside
of the removable bowl and the inside of the
fixed bowl are dry. The removable bowl and
the fixed bowl can freeze together.
Assembling the appliance
(fig. B - D)
•
Place the seal ring (10) on top of the fixed
bowl (8).
•
Mount the removable bowl (9) into the fixed
bowl (8).
•
Mount the mixing arm (11) into the
removable bowl (9). The bottom of the
mixing arm (11) rests in the centre of the
removable bowl (9).
Caution! The mixing arm (11) does not fit firmly
into the removable bowl (9) automatically. The
bowl lid (12) must first be mounted onto the
removable bowl (9) with the mixing arm (11)
fitted in the centre of the bowl lid (12).
•
Mount the bowl lid (12) onto the removable
bowl (9). Make sure that the top of the
mixing arm (11) is fitted in the centre of the
bowl lid (12). Tighten the bowl lid (12) by
turning it clockwise.
•
Mount the bowl lid cover (13) onto the bowl
lid (12).
•
Mount the motor unit (14) onto the bowl lid
(12).
Caution! Make sure that the hole in the top of
the mixing arm (11) aligns with the shape of
the shaft of the motor unit (14) (fig. D).
Use
Switching on and off (fig. A)
•
Press the POWER button (3) to switch on
the appliance. The digital display (2) shows
"50:00".
•
Press the POWER button (3) again to switch
off the appliance.
Setting the time (fig. A)
The required time can be set using the TIMER
button (5). The default time is 50 minutes.
•
Press the TIMER button (5) 1x to set the
time to 40 minutes. The digital display (2)
shows "40:00".
•
Press the TIMER button (5) 2x to set the
time to 30 minutes. The digital display (2)
shows "30:00".
•
Press the TIMER button (5) 3x to set the
time to 10 minutes. The digital display (2)
shows "10:00".
•
Press the TIMER button (5) 4x to set the
time to 50 minutes. The digital display (2)
shows "50:00".
15