Elari fixiTone Air FT-2 Guia De Inicio Rapido página 3

Thank you for choosing the ELARI FixiTone Air
Before operating the device, carefully read this manual and keep it for
future reference.
To take advantage of the device's full capabilities and ensure an ex-
tended service life, it is recommended that you read the full manual,
which can be downloaded at: https://elari.net/support/.
The exterior and software of your device may differ from the pictures
in this manual as all illustrations are based on prototypes.
The company shall not be made liable for any damage caused as the
result of any misuse of the device.
In order to ensure the continuous improvement of our devices, we
reserve the right to implement any changes to the design, software,
and technical specifications of the device, without any prior notice
to the user. Please see all up-to-date information at www.elari.net.
Package content: wireless headphones, microUSB charging cord,
AUX audio cable, airplane audio adapter, 3 pairs of colorful stickers.
Technical Specifications:
Bluetooth
Bluetooth Profile
Supported Audio Codecs
Bluetooth range from Device
Headphone Driver Size
Sensitivity
Frequency Range
v 5.0 +EDR
A2DP, AVRCP, HFP, HSP
AAC, SBC
up to 10 m
Ø30 mm
85±3 dB (@ 1 kHz, 126 mV)
20 Hz~20 kHz
4
EN
Impedance
Microphone Input Sensitivity
Battery Capacity
Talk Time
Playback Time
Standby time
Charging Time
Weight
Charging battery
1. Connect the headphones to the power source using the microUSB
cable supplied with the device*. The LED will turn red.
* Power adapter is not included. We recommend using a power adapt-
er with the following specifications: 5 V, max. 1.0 A, for example ELARI
PowerPort.
2. When the battery is charged, the LED indicator will turn blue.
Using the Product:
Turn on
32Ω (@ 1 kHz)
42 dB (±3 dB)
Li-Ion 300 mAh, 3.7 V;
up to 15 hrs
up to 20 hrs
up to 90 days
~2 hrs
110 g
Press the button for 3 seconds until you
hear a beep. The LED indicator will flash blue
once.
5