Elari fixiTone Air FT-2 Guia De Inicio Rapido página 4

Pair the head- Open the Bluetooth menu on your device
phones with an and turn on the device search option. Choose
external Bluetooth "ELARI FixiTone Air" from the list of identi-
device fied Bluetooth devices. In pairing mode, the
LED flashes blue and red alternately. Upon
successful pairing, you will hear a beep in the
headphones, and the LED indicator will turn
blue.
Turn off Press the
hear a beep. The LED indicator will flash red
for 1 time.
Play music Briefly press the
blue every 5 seconds.
Pause Briefly press the
blue.
Previous track Firmly press the VOL - button.
Next track Firmly press the VOL + button.
Reduce volume Briefly press the VOL - button. When you
reach the minimum volume level, you will
hear a beep.
Add volume Briefly press the VOL+ button. When you
reach the maximum volume level, you will
hear a beep.
Answer call Briefly press the
a beep and the LED will flash blue every 5
seconds.
End call Briefly press the
button for 3 seconds until you
button, the LED will flash
button, the LED will turn
button. You will hear
button.
6
Decline the call Firmly press the
Redial the latest call Double-press the button
Low battery You will hear a beep and the LED will flash red
every 3 seconds.
NOTE:
ELARI FixiTone Air remembers previously connected devices. When
turned on, the headphones automatically connect to a previously
connected device, providing the Bluetooth option is on and the head-
phones are within range.
In order to save battery power, the headphones turn off automatically
if there is no pairing with any Bluetooth device for 5 minutes.
Bluetooth pairing and signal transmission can be complicated by the
presence of barriers between paired devices: Wood, metal and other
materials can absorb or block the signal. For the same reason the data
transmission distance can be reduced.
The operating time of the device may vary depending on the tem-
perature or operating conditions.
Troubleshooting suggestions:
Cannot turn on head- Please check the headphone power
phones level.
Unable to charge the Check the charging cable connection.
battery
button for 1.5 seconds.
button.
7