Descargar Imprimir esta página

TruVision TVGP-M01-0201-PTZ-G Guia De Instalacion página 13

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 23
accessories.
Ensure that the power is disconnected before you
wire, install, or disassemble the camera.
Local storage
Insert a Micro SD card with up to 256GB to use
the camera as an additional recording device, or
as a backup in case of failure of communication
with the network video recorder. The card is not
supplied with the camera. Recorded video and
log fi les can be accessed via the web browser or
via TruVision Navigator.
Setting up the camera
Once the camera is mounted, set up its network
and streaming parameters so that it can be
controlled over the network, and program it as
appropriate for its location. Refer to the camera's
confi guration manual for further information,
which is available from our website.
Technical specifi cations
Electrical
Voltage input
12 VDC, PoE 802.3at
12 VDC adapter included
(without mains lead)
EN
11

Publicidad

loading