EMERYMARK EM 10 Manual De Operación página 42

Operation Manual EM
1.2.2 Electrical requirements
!
WARNING:
Make sure that the plug has not been installed in the power supply.
The EM40 model requires a three-phase connection at 208-230 Volts. The EM10 and EM20
models require a single-phase or three-phase connection at 220 Volts, depending on your prefe-
rence.
In order to connect the machines to the power supply, you need to install the corresponding
plug according to your equipment:.
SINGLE-PHASE
L1 L3
BLACK BLUE
* Please consult your distributor in the US and Canada
!
WARNING:
Use copper conductors only.
42
GROUND L1
GREEN BLACK
TYPE OF PLUG
MODEL SINGLE-PHASE
EM-10 L6-30
EM-20 L6-30
EM-40 ---
THREE PHASE
L2
DELTA (RED)
BLUE
THREE PHASE
*L15-30
*L15-30
*(CHECK WITH DISTRIBUTOR)
www.emerymark.com
L3 GROUND
GREEN