Silvercrest H14271A Instrucciones De Utilización Y De Seguridad página 28

j
Now press the zero button
reads "TARE".
j
Now place more food in the weighing bowl
j
The LCD readout indicates the weight of the
5
food you have added in the selected unit of weight.
j
Continue in this way only until the maximum
capacity of the kitchen scale
the weighing bowl
1
remove part of the weighed
Q
food
j
Place the weighing bowl
scale
2 .
j
Press the ON/OFF button
kitchen scale on.
2
j
Select the unit of weight by pressing the Unit
button . You can choose between "g/kg"
6
and "oz/lb".
j
Place the food you wish to weigh in the bowl.
j
The LCD readout indicates the weight of the
5
food in the selected unit of weight.
j
Now press the Zero button
j
Now remove the required amount of food from
the weighing bowl
1
j
The LCD readout 5 indicates the weight of the
food you have removed as a negative number.
Set the countdown timer/alarm
Q
The timer on the kitchen scale has a time span of 0
to 99.50 minutes. The set time is counted down in
reverse to "0". An alarm signal then sounds and
the alarm display " "
15
j
Press the ON/OFF button
kitchen scale on.
2
j
Press the Timer button
j
Set the required time by pressing the Timer button
" " , or the Timer button " "
6
j
Press the Timer button
set time and to start the countdown timer.
j
Press the Timer button
countdown timer.
28 GB/MT
. The scale now
7
.
1
is reached or
2
is full.
on the kitchen
1
to switch the
3
.
7
.
flashes.
to switch the
3
.
4
.
7
again to confirm the
4
again to stop the
4
j
Press the Timer button
time to "0".
nOtE: When the set time has elapsed, an
alarm signal sounds.
j
Press the ON/OFF button
at the same time switch off the kitchen scale
Display ambient temperature
Q
When the kitchen scale
2
readout shows the current ambient temperature.
5
This is indicated by the temperature display
Switch off the kitchen scale
Q
The kitchen scale switches itself off automatically
2
after 90 seconds of inactivity to save energy.
j
Press the ON/OFF button
kitchen scale off manually.
2
again to reset the set
4
to stop the alarm and
3
.
2
is switched on, the LCD
in °C.
12
3 to switch the