Publicidad
Idiomas disponibles
Idiomas disponibles
button as many times as necessary
to set the timer, considering 1 press
1H , 2 presses 2H up to 15 presses or
15 hours timer. The display will not
flash after 3 seconds, meaning that
the timer setting is complete and the
fan will continue working until the
programmed operating hours are
reached. The timer symbol will light
up.
Using the remote control:
1. Press "ON/OFF" button.
2. Press "UP SPEED" o "LOW SPEED"
buttons to select the desired speed,
considering this fan has 24 speeds.
The display will show the selected
speed.
3. Press the "SWING" button to allow
oscillation from right to left. Pressing
again will stop the oscillation.
4. Setting the timer: press "TIMER"
button as many times as necessary
to set the timer, considering 1 press
1H , 2 presses 2H up to 15 presses or
15 hours timer. The display will not
flash after 3 seconds, meaning that
the timer setting is complete and the
fan will continue working until the
programmed operating hours are
reached. The timer symbol will light
up.
5. "SLOW SPEED OR NIGHT MODE"
function: When the fan is running,
press this button on the remote control
and the speed will change to speed 3.
6. "MEDIUM SPEED" function: When the
fan is running, press this button on
the remote control and the speed will
be set to speed 15.
7. "HIGH SPEED" function: When the fan
is running, press this button on the
remote control and the speed will be
set to speed 24.
CLEANING AND MAINTENANCE
This appliance does not require a lot of
maintenance. However, in order to extend
the life of the appliance, we suggest that
you read the following notes about cleaning
and maintenance:
• Switch off and unplug from the
power supply before assembling or
disassembling and cleaning.
• Keep the air grills at the back of the
main body free from dust– use a
vacuum cleaner to remove these when
necessary.
• Fan parts should be cleaned using a
mild soap and a damp cloth or sponge.
Do not allow any water or other liquid
penetrate into the motor case.
• Remove soap film with clean water
thoroughly.
• If the appliance is not going to be
used for long time, place the fan in its
original package and keep it in a safety
and dry place.
Do not use harsh detergents,
chemical
solvents
damage the surface of the
fan components.
ENVIRONMENTAL INFORMATION
This appliance is labelled in
compliance with European
directive 2012/19/EU for Waste
Electrical
Equipment
ensuring that this appliance is
disposed of correctly, you will help prevent
any possible damage to the environment
and to human health, which might
otherwise be caused if it were disposed of
in the wrong way.
The symbol on the product indicates that
it may not be treated as normal household
waste. It should be taken to a collection
point for the recycling of electrical and
electronic goods.
This appliance requires specialist waste
disposal. For further information regarding
EN
cleaners
or
as
they
may
and
Electronic
(WEEE).
By
15
Publicidad
