Publicidad
Idiomas disponibles
Idiomas disponibles
Installing / Removing the Belt Clip
3.3
a.
Installing the Belt Clip: Place the belt clip above the corresponding holes
on the back of the radio, and screw it into place clockwise with the two
supplied screws.
b.
Removing the Belt Clip: Unscrew counter-clockwise to remove the belt
clip.
Installing the Additional Speaker/Microphone (Optional)
3.4
Pry open the rubber MIC-Headset jack cover and then insert the Speaker /
Microphone plug into the double jack.
AT-D878S Digital DMR and Analog
3. PREPARATION
Two Way Radio
13
Publicidad
