Publicidad
Idiomas disponibles
Idiomas disponibles
Status Indications
4.1
The top LED will help you to identify the current radio status.
LED Indication
Flashes Red
Constant Red
Constant Green
Constant Cyan
Flashes Green
Programmed Key
4.2
It is possible to set different functions for [PF1], [PF2], [PF3],
Method 1: In radio Menu - Settings - Radio Set - Key - PF1, PF2, PF3, P1,P2.
Method 2: In PC software - Public - Optional Setting - Key function.
OFF
No Function
Volt
Check the current battery capacity voltage
Tx Power
Switch the power between super high, high, middle and low power.
TalkAround
Switch between Talk Around and Repeater mode
Reverse
Turn on/off the frequency reverse function.
Digi Encrypt
Choose the digital encryption group for digital channel
In Analog mode, send the DTMF/5TONE/2TONE encode. This
Call
function is only valid for analog channel.
VOX
Set up the VOX level
Sub channel PTT, press to start the call on sub channel (NOTE: On
Sub PTT
PF1 - PF2 - PF3 Keys Only)
Scan
Scan on/off
FM Radio
FM radio on/off
Long press the key to start alarm, short press again to exit the
Alarm
alarm.
Record Switch
Enable/disable the recording function
Start/stop recording. When stop recording, the radio will remind
Record
repeat or send the record.
SMS
In digital mode, press to enter into SMS messages
Dial
Start the manually dial
GPS Info
Check the GPS position information
Monitor
Monitor the weak signal or the signal with unmatched ID.
AT-D878S Digital DMR and Analog
4. RADIO OVERVIEW
Status
Low battery voltage
Transmitting
Analog Receiving
Digital Receiving
Scan
Two Way Radio
,
keys.
15
Publicidad
