Publicidad
Idiomas disponibles
Idiomas disponibles
a.
If the radio is programed with callers DMR ID number in the digital
contact list, when receiving a call, the radio will ring or vibrate briefly.
b.
The blue LED lights up.
c.
The left top corner of LCD shows the RSSI icon, and the LCD display
will show DMR ID/name/city/state/country/call type and incoming icon
based on what is in the contact list.
d.
When the call is ended, it will display "Call end", and you can press [PTT]
to respond the call.
Making a Call
5.6
Method 1: from the Channel switch.
Turn the channel switch to choose a programmed channel.
Method 2: from the Talk Group.
Turn the channel switch to choose a programmed channel;
(1)
Press
(exit) key to enter the TG List, press the
(2)
choose a TG.
Method 3: from the keypad.
Turn the channel switch to choose a programmed channel.
(1)
Press
(Menu) key to Talk Group, press select to enter TG.
(2)
Press
/
(3)
Input the ID number by keypad, press
(4)
Private DMR ID.
Hold the radio vertical 2.5-5cm from your mouth, press the [PTT] key to
start the call, the red LED lights up, the receiver ID/name/city/state/country/
call type and call out icon will be display on the LCD.
Release [PTT] key to receive the reply.
Monitor
5.7
In standby, press the [PF2] key to enter Monitor. When receiving matched
carrier but the signaling / ID is unmatched or the signal is too weak, this
function allows monitor the weak signal and signal with unmatched ID.
AT-D878S Digital DMR and Analog
5. BASIC OPERATIONS
key to Manual Dial, press Select.
Two Way Radio
/
key to switch group ID or
key to
19
Publicidad
