Publicidad
Idiomas disponibles
Idiomas disponibles
•
LUBRICATION: It is a correct lubrication of the treadmill with silicon oil or teflon is really
important. This lubrication must be performed regularly. Depending on its use even before
the first use. There is a hole for adding oil on motor cover. After starting machine, please
change to highest speed, then add the oil into the hole, the oil will be spread from the
middle between the running belt and board.
< 3 hours/week
4 – 7 hours/week
> 8 hours/week
•
ALIGN AND TIGHTEN THE BELT OF THE TREADMILL
•
ALIGN THE BELT: Due to its use, the belt can move off center. If
the belt has moved to the left, start treadmill and increase the speed
to 3KM/H .Use the 5mm Wrench to turn the fixed left bolt clockwise
or turn the fixed right bolt counterclockwise. Don't tighten the belt
too much in order to be able to walk. Repeat this procedure until the
belt is properly aligned.
If deviate to the left, then adjust the screw on the
left side clockwise or the screw on the right side
anticlockwise.
2 months
1 month
15 days
If deviate to the right, then adjust the screw on the
right side clockwise or the screw on the left side
anticlockwise.
28
Publicidad
