HOMCOM A90-283V90 Manual Del Usuario página 30

VII.RECYCLING INFORMATION
This electronic product must not be disposed of in municipal waste. To preserve the envi-
ronment, this product must be recycled after its useful life as required by law.
A correct lubrication of the treadmill with silicon oil or Teflon is REALLY IMPORT-
ANT. This lubrication must be performed regularly depending on each person, even
VIII. COMMON ERRORS:
ERRO CODE
A) signal wire not well connected
E01
B) signal wire broken
A) Over current protection
B) Motor burnt
E02
C) PCB burnt
D) Input voltage too low
E03 Over load protection
A) Sudden big current protection
E04
B) PCB burnt
A) Explosion-proof protection
E05
B) PCB burnt
C) Motor wire not well connected
E06 Motor wire not well connected or broken
--- Safety key off
before its first use.
REASON
Re-connect signal wire
Change new signal wire
Turn off machine and restart
Change new motor
Chang new PCB
Check input voltage
Turn off machine to have a rest and restart
Turn off machine and restart
Chang new PCB
Check input voltage
Chang new PCB
Re-connect motor wire
Re-connect or change new motor wire
Re-put safety key
30
HOW TO SOLVE