Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY RECOMMENDATIONS FOR CHARGING ADAPTER / USB CORD
1. Never pull on the cord.
2. To insert the plug, grab it firmly and guide it into the outlet.
3. To disconnect the appliance, grab the charging adapter and remove it from the outlet.
4. Before each time the appliance is charged, inspect the USB cord to check for any tears
and/or signs of abrasion. If these are found, this means the USB cord needs to be replaced.
5. Never wrap the cord tightly around the appliance as this may unduly stress the cord in the
point where it enters the charger, or the charging port of the appliance, and cause it to fray
if it breaks.
BEFORE FIRST USE
1. Extract the various components from the packaging, check that they are intact and
complete, gently remove any protections and labels. The packaging includes:
No.1 Motor body
•
•
No. 1 Processing lid
•
No. 1 Shaft with 4 blades
No. 1 Ripple disc blade
•
No. 1 Glass bowl with lid
•
•
No. 1 USB-C cord
No. 1 Charging adapter
•
2. Before the first use, or after long periods of non-use, wash all the parts that come into
contact with foodstuffs as indicated in the "Cleaning and Maintenance" section.
3. Check that all the parts are properly assembled and in position
before use.
4. Charge the appliance.
RECHARGING THE BATTERY
1. Open the rubber protection on the motor housing. Connect the USB-C connector of the
cord to the motor housing.
2. Connect the USB-C connector to the charging adapter.
3. Connect the charging adapter to the wall socket.
4. The lights will flash during charging. The lights stop flashing when the appliance is fully
charged. See the "Indicator light" section for details.
5. Approximately 4 hours are needed to fully charge the appliance. Do not recharge the
device for more than 12 hours.
Once charging is complete, disconnect the adapter from both the
6.
power outlet and the appliance. Do not turn on the device during
the charging operation
Note:
The appliance is shipped with the batteries approximately 30% charged. During use, one or
•
two LED indicator lights may turn on. The appliance will work properly even without being
charged first. It is recommended to fully charge the appliance before first use for best
performance.
•
To maintain optimum performance and battery life, it is recommended to charge the battery
in an ambient temperature between 15°C and 25°C. This precaution will prevent serious
damage to the battery itself.
16
.
Publicidad
