Hoover STREAMLINE FH46000V Manual Del Usuario

STREAMLINE
HARD FLOOR CLEANER
USER MANUAL
IMPORTANT: READ ALL INSTRUCTIONS CAREFULLY
BEFORE ASSEMBLY AND USE.
This product is intended for Household use only.
If used Commercially warranty is VOID.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
READ ALL SAFETY WARNINGS AND INSTRUCTIONS BEFORE USING THIS PRODUCT.
WARNING
: WHEN USING AN
ELECTRICAL PRODUCT, BASIC PRECAUTIONS
SHOULD ALWAYS BE FOLLOWED TO AVOID
ELECTRIC SHOCK, FIRE, AND/OR SERIOUS
INJURY, INCLUDING THE FOLLOWING:
• Fully assemble product prior to use.
• Operate cleaner only at voltage specified on
data plate on lower handle of cleaner.
• Do not leave appliance when plugged in. Unplug
from outlet when not in use and before cleaning
or servicing.
• Use indoors only. Do not immerse. Use only on
surfaces moistened by the cleaning process.
• To Reduce the Risk of Fire and Electric Shock
due to internal component damage, use only
Hoover® Cleaning Fluids intended for use with
this appliance. See the Cleaning Fluid section
of this manual.
• Do not allow to be used as a toy. Not intended
for use by children age 12 and under. Close
supervision is necessary when used by or
near children. To avoid injury or damage, keep
children away from product, and do not allow
children to place fingers or other objects into
any openings.
• Use only as described in this manual. Use
only Hoover's recommended attachments and
products.
• Do not use product with damaged cord or
plug. If product is not working as it should,
has been dropped, damaged, left outdoors, or
dropped into water, call customer service at
1-800-944-9200 prior to continuing use.
• Do not pull or carry by cord, use cord as a
handle, close a door on cord, or pull cord around
sharp edges or corners. Do not place product on
cord. Do not run appliance over cord. Keep cord
away from heated surfaces.
• Do not unplug by pulling on cord. To unplug,
grasp the plug, not the cord.
©2023 Techtronic Floor Care Technology Limited. All Rights Reserved. Distributed by, Royal Appliance Mfg. Co. Charlotte, NC 28262.
™
• Do not handle plug or appliance with wet hands.
• Do not put any object into openings. Do not use
with any opening blocked; keep free of dust,
lint, hair, and anything that may reduce air flow.
• Keep hair, loose clothing, fingers, and all parts
of body away from openings and moving parts.
• Turn off all controls before unplugging.
• Use extra care when cleaning on stairs. To
avoid personal injury or damage, and to prevent
the cleaner from falling, always place cleaner
at bottom of stairs or on floor. Do not place
cleaner on stairs or furniture, as it may result in
injury or damage.
• Do not use to pick up flammable or combustible
liquids, such as gasoline, or fine wood sandings,
or use in areas where they may be present.
• Connect to a properly grounded outlet only. See
Grounding Instructions.
• Not intended for use on carpets.
• Do not pick up anything that is burning or
smoking, such as cigarettes, matches, or hot
ashes.
• Do not use without Tanks or Filters in place.
• Do not clean over floor electrical outlets.
CAUTION
: TO REDUCE THE RISK OF
DAMAGE:
• Avoid picking up hard, sharp objects with this
product, as they may cause damage.
• Store appropriately indoors in a dry place. Do
not expose machine to freezing temperatures.
• Do not use sharp objects to clean out hose as
they can cause damage.
• To assist in reducing drying time, be certain the
area is well ventilated when using detergents
and other cleaners with this machine.
• With brush roll on, do not allow cleaner to sit in
one location for an extended period of time, as
damage to floor can result.
• Water will drip from the brush roll and
underside of the product after use and may
puddle. To avoid damage to wood and laminate
flooring and to avoid potential slip hazard, after
use (a) do not leave the product on wood and
laminate surfaces and remove to a hard surface
and (b) place unit on absorbent material (such
as a towel) to soak up drips.
• Check and follow flooring Hoover's warranty
and recommendations regarding the use of
hard floor cleaning machines prior to using this
product on your sealed hard floors.
GROUNDING INSTRUCTIONS
This appliance must be grounded. If it should
malfunction or breakdown, grounding provides
a path of least resistance for electric current to
reduce the risk of electric shock. This appliance
is equipped with a cord having an 1equipment-
grounding conductor (C) and grounding plug (A).
The plug must be inserted into an appropriate
outlet (B) that is properly installed and
grounded in accordance with all local codes and
ordinances.
1
B
A
C
2
D
D
G
E
F
WARNING
: IMPROPER CONNECTION
OF THE EQUIPMENT-GROUNDING CONDUCTOR
CAN RESULT IN THE RISK OF ELECTRIC SHOCK.
CHECK WITH A QUALIFIED E ELECTRICIAN
OR SERVICE PERSON IF YOU ARE IN DOUBT
AS TO WHETHER THE OUTLET IS PROPERLY
GROUNDED.
Do not modify the plug provided with the
appliance - if it will not fit the outlet, have a
proper outlet installed by a qualified electrician.
This appliance is for use on a nominal 120-volt
circuit and has a grounding plug that looks like
the plug (A) illustrated in Fig. 1. A temporary
adapter (D) may be used to connect this plug to
a 2-pole receptacle (E) if a properly grounded
outlet is not available (Fig. 2). The temporary
adapter should be used only until a properly
grounded outlet (B) can be installed by a
qualified electrician (Fig. 1). The green colored
rigid ear, lug, or the like (F) extending from the
adapter must be connected to a permanent
ground (G) such as a properly grounded outlet
box cover (Fig. 2). Whenever the adapter is used,
it must be held in place by a metal screw.
NOTE: In Canada, the use of a temporary adapter
is not permitted by the Canadian Electrical Code.
CAUTION
: To reduce the risk of injury from
moving parts - Unplug before servicing. Do not
use cleaner without brushes in place.
LUBRICATION: The motor is equipped with
bearings which contain sufficient lubrication for
their lifetime. The addition of lubricant could
cause damage. Do not add lubricant to motor
bearings.
THERMAL PROTECTION
A thermal protector has been designed into your
cleaner to protect it from overheating. When
the thermal protector activates the cleaner
will stop running. If this happens proceed as
follows:
1. Turn cleaner OFF (and unplug from outlet).
2. Empty dirty water tank.
3. Inspect the nozzle for any obstructions.
Clear obstructions if present.
4. When cleaner is de-energized and motor
cools for 30 minutes, the thermal protector
will deactivate and cleaning may continue.
If the thermal protector continues to activate
after following the above steps, your cleaner
needs servicing.
HAVE A
QUESTION?
HOOVER HAS THE ANSWER!
®
START WITH
HOOVER.COM/HELP
DO NOT
RETURN TO STORE
Start with 24/7
resources like these:
FAQs
HOW-TO-VIDEOS
TROUBLESHOOTING
VIDEOS
Or call us and
we'll talk you through it.
CUSTOMER SUPPORT
800-944-9200
Mon-Fri, 9am-6pm EST
PRIMARY
961152278-R0