Advanced Bionics PLATINUM Serie Instrucciones De Uso página 20

To check the battery charge status while the processor is in operation, turn
the processor off and then back on to any program position. The red LED
indicator sequence will indicate the battery charge status.
Lock Status
Lock refers to the successful communication between the processor
and implant. When the processor program control is turned from the off
(o) position to positions •, , or , and the battery charge sequence is
complete, the red LED indicator begins to flash approximately once per
second, indicating lock has not yet been achieved. Flashing will continue
until the headpiece is properly positioned on the head. Flashing red
will resume if there is any problem with communication or loss of lock
between the processor and the implant.
18