Publicidad
Idiomas disponibles
Idiomas disponibles
e) Treat electric tools carefully. Check whether the
moving parts work perfectly and do not drag,
whether not broken or damaged to such an extent
that functioning of electric tools could be affected.
Have any damaged parts repaired before using
the machine. Many accidents are caused by poorly
maintained power tools.
f ) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to
be performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
5) Service
a) Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
Safety instructions for Electrical branch chainsaw
Keep all parts of your body in safe distance from the
saw when running. Before starting the saw, make
sure the saw chain does not touch anything. A mo-
ment of inattention when working with the chainsaw
is able to cause the saw chain to catch your clothes or
parts of your body.
Wear protective glasses and ear protectors. Further,
wearing head, hand and leg protection equipment
is recommended. Suitable protective clothing minimi-
ses the risk of injury by thrown-away wood chips and
possible contact with the saw chain.
Do not work on trees with the chainsaw. There is a risk
of injury when working on a tree.
Provide safe posture at all times and use the
chainsaw only when standing on a solid, safe and
level surface. A slippery or unstable surface, such as
ladder, may lead to loss of balance or loss of control over
the chainsaw.
When cutting a tense branch, be sure to know that
the branch will bounce back. If tension in the wood
fibres gets released, the tense branch may hit the ope-
rator and/or cause a loss of control over the chainsaw.
Be especially careful when cutting scrubs and
saplings. Thin material may get caught in the chainsaw and hit
you or you may lose your balance.
Carry the chainsaw by the front handle in a
switched-off condition and the saw chain must be
deflected from your body. Fit a protection cover on
the chainsaw whenever it is transported or stored.
Careful chainsaw treatment reduces the likelihood of an
accidental contact with the running saw chain.
Other safety instructions
Keep children and other persons including animals in a
safe distance when using the appliance. Minimum safe
distance is 10 m.
Provide adequate lighting or good lighting conditions
when working with the machine.
Wear suitable protective clothing such as sturdy shoes
with non-slip sole, robust long trousers, gloves, safety
glasses and hearing protection!
Do not wear loose clothing or jewels. Hear, clothing
and gloves must be out of reach of moving parts as
they could get caught by the rotating parts. Do not use
the appliance when barefooted or in open sandals.
Electrical hazard , keep at least 10 m distance away
from electrical power lines.
Be careful when going backwards – risk of tripping!
Do not run! Immediately remove cut branches/knots
from the work area to prevent injuries. Watch out for
falling branches!
Walk! Do not run! As soon as a branch being cut off
starts cracking and falling down, move to the side im-
mediately and keep safe distance from the falling wood
as it can hurl back up and cause injuries.
Switch the appliance immediately off and remove the
replaceable battery from the appliance when the saw
chain gets blocked. Remove the blocked object.
When working, keep the appliance firmly with both
hands and with a distance from your body.
Make sure the appliance is off before inserting a
battery.
The ON/OFF switch and safety switch must not be
locked.
Before using, check the tightness and
proper seating of all screwed and socket
joints and protective equipment and if all
moving parts are moving smoothly.
It is strictly prohibited to demount, adjust
and alienate the protective equipment on
the machine or put other protective
equipment on the machine.
Do not use the appliance if damaged or
the safety equipment is defective. Replace
any worn and damaged parts.
Do not use the device near flammable liquids or gases.
Risk of fire and explosion in case of short circuit.
Avertissement: Cet outil électrique génère pendant
le fonctionnement un champ magnétique. Dans
certaines circonstances, ce champ peut perturber le
fonctionnement des implants médicaux actifs ou
passifs. Afin de réduire le risque de blessure graves ou
mortelles, nous recommandons aux personnes portant
un implant médical de consulter un médecin et le
fabricant de l'implant médical avant l'utilisation de
l'appareil.
Maintenance
Unplug the machine before any work
on it.
Repairs and works specified in these Instructions may
only be performed by qualified authorised staff.
Use only original accessories and original spare parts.
ENGLISH
26
Publicidad
