Publicidad
Idiomas disponibles
Idiomas disponibles
b.
Press the two buttons on the inside of the joint between the
pushchair's frame and the handle at the same time.
c.
Keeping both buttons pressed, push the handle down as far
as possible. With the handle folded, push the frame and the
backrest as far forward as possible.
d.
Hold the frame where the front and rear of the base of the
pushchair meet and gently lift so that the front and rear
wheels begin to come together.
e.
Lay the pushchair so that the part with the backrest is on top.
f.
When the pushchair is folded, push it down until you hear
a "click", which means it is properly locked in the folded
position.
g.
When folded, the pushchair can be placed upright. The
special handle makes it easy to carry.
2. Unfolding the pushchair (Fig. 2)
a.
Gently pry the folding lock on the pushchair open.
b.
Grab the handle and pull it towards you.
c.
Hold the backrest frame with both hands and push upwards
to unfold the entire pushchair and place it on its wheels.
d.
Fasten the fasteners under the seat unit on both sides.
3. Backrest adjustment (Fig. 3)
a.
Press the button on the back of the backrest with one hand.
b.
Use your other hand to adjust the length of the belts by
setting the backrest to the desired position.
4. Dismantling the canopy (Fig. 4)
a.
Unfasten the Velcro fasteners that connect the canopy to the
backrest.
b.
Then unzip the zipper located at the top of the canopy, near
the pushchair's frame.
c.
Unhook the rubber straps on both sides, near the canopy
hinges, and slide out the canopy frame.
33
Publicidad
