Skiddoü Mell A6 Manual De Usuario página 36

the safety bar and fasten it with the fasteners located on the
cover.
b. Put the rain cover on the pushchair and fasten it with the
Velcro fasteners located on the rain cover on the frame of the
pushchair.
c. Place the mosquito net on the pushchair and Velcro it to the
pushchair's frame.
16. Removing the additional cushion (Fig. 16)
The pushchair is equipped with an additional cushion. To remove it,
put the seat belt through the holes in the cushion.
17. Installing the cup holder (Fig. 17)
To install the cup holder, hook it onto the pin located on the top of
the pushchair's frame.
18. Additional information (Fig. 18)
a. When the backrest is fully reclined, there is a flap near the
handle that you can lift to see the inside of the pushchair. It
also serves as additional ventilation for the pushchair.
b. To fully expose the interior of the pushchair, unhook the
Velcro fasteners on the edges of the canopy fabric and lift the
fabric up.
III. Maintenance and cleaning
• The user is responsible for regular pushchair maintenance.
• Regularly check that all parts of the pushchair are in working
order.
• Regular lubrication of all mobile parts and mechanisms using dry
grease is extremely important. Clean the product using a soft cloth
after lubrication.
• Clean the frame with a wet cloth and mild detergent. The user is
responsible for regular pushchair maintenance.
• Clean the frame with a soft, wet cloth and mild detergent; remove
excess water using a dry cloth.
• Do not damage the brakes, wheels and tyres during use.
36