Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
cleaning. The time settings and the cleaning scheduling must be carried out from the remote
control. Once the robot has been scheduled, it will automatically carry out the cleaning cycles
every scheduled day.
Note: Make sure the light indicator is lighted in blue indicating it is activated
before starting cleaning.
Current time
Long press the time button. The first 2 digits, indicating the hour, will start blinking.
Fig. 23.
2. Use the up and down direction buttons to set the current time. Then, use the left and right
buttons to switch from hours to minutes and repeat the before step.
Fig. 24.
Press the time button to save the settings.
Fig. 25.
Cleaning scheduling
Long press the schedule button. The first 2 digits, indicating the hour, will start blinking.
Fig. 26.
Use the up and down direction buttons to set the current time. Then, use the left and right
buttons to switch from hours to minutes and repeat the before step.
Press the schedule button again to save the settings.
To cancel the scheduled cleaning, follow the below steps:
Fig. 27.
Set the clock on the remote control to 00:00 am and save it.
Fig. 28.
Switch the robot off for 1 minute and switch it on again.
Note:
The robot will beep to indicate all settings have been saved.
When the remote control's batteries are replaced, the clock and schedule times must be set
again.
6. MOBILE APP AND WI-FI CONNECTION
To access to all the robot's function from wherever you are, it is suggested to download the
Conga 1690 1890 App. It will allow you to effectively control your robot and enjoy premium
cleaning.
App advantages:
32
Control your robot in an easy and intuitive way.
Activate the cleaning process from any point.
Carry out settings and daily scheduling.
Choose between its different cleaning modes: Auto, Gyro, Edge, Twice, Spiral, Scrubbing, Area,
Manual, Random and Back home.
View how the robot creates an interactive map as it is cleaning.
Check the cleaned surface and the time taken.
Check the cleaning history.
Configuration:
Fig. 29.
Download the Conga 1690 1890 App from App Store or Play Store.
Create an account with your e-mail and password.
Confirm login.
Add your Conga robot.
Connect to Wi-Fi.
Warnings:
The App is not compatible with 5 GHz networks.
The Wi-Fi name and password cannot exceed 32 bits.
If the network configuration fails to connect, follow the steps below:
Press the power button for 5 seconds, the robot will enter sleeping mode and the Wi-Fi light
indicator will blink fast indicating connection error. Retry connecting the robot again following
the steps in the before section.
If the connection fails again, check if:
The robot is too far away from the router.
The Wi-Fi password is incorrect.
The Wi-Fi network is not 2.4 GHz.
* This model is compatible with voice virtual assistants Google Assistant and Alexa.
Cleaning modes
The robot has different cleaning modes that adapt to different cleaning requirements.
Auto mode
Automatic cleaning mode: From the standby mode, press the power button on the robot, the
remote control or on the App and the robot will automatically start operating. It will carry out a
cleaning cycle in zigzag, then another one in Edge mode, and then will finish in Random mode.
When it finishes, it will return to the charging base. It is the most commonly used cleaning
mode and it is used to clean the the whole house's surface. The robot automatically vacuums
the floor's dust, in and organized and efficient way, as it features memory and gyroscopic
navigation. Moreover, it changes direction when it finds obstacles throughout its route and
ENGLISH
33
Publicidad
