Batavia Maxxspray BT-CPS002 Manual De Usuario página 13

D. Spray jet pulsates
E. Pattern runs or
sags
F. Too much
over-spray
G. Pattern is very
light and splotchy.
11. Technical data
Battery voltage: . . . . . . . . . . 18 V Li-Ion
Flow rate: . . . . . . . . . . . . . .700 ml/min
Max. viscosity: . . . . . . . . . . . . . 60 DIN
. . . . . . . . . . . . . . (runout time: 60 sec.)
Nozzle size: . . . . . . . .Φ2.0mm / Φ2.5mm
Canister Capacity: . . . . . . . . . . . 900 ml
Weight: . . . . . . . . . . . . . . . . . 1.22 kg
12. Disposal
Do not dispose of electric power
tools with domestic refuse.
The electric power tool is shipped
in packaging to reduce transport damage.
This packaging is a raw material and as
such can either be reused or can be fed
back into the raw material cycle. The elec-
tric power tool and its accessories are
made from various materials such as met-
als and plastics. Take defective compo-
nents to a special refuse collection point.
Ask about these at your specialist shop or
local council.
3. Material volume setting too
high (+).
4. Nozzle clogged.
5. Air filter clogged.
6. Too little pressure build-up in
container.
1. Material in container running
out.
2. Air filter clogged.
1. Applying too much material.
1. Gun too close to spray object. 1. Increase distance.
2. Too much material applied.
1. Moving the spray gun too
fast
-s
3. Decrease volume setting (-).
4. Clean.
5. Change.
6. Tighten container.
1. Refill.
2. Change.
1. Adjust material flow or
increase movement of spray
gun.
2. Decrease volume setting (-).
1. Adjust material flow or decrease
movement of spray gun.
Batteries
12.1
Think of the environment when disposing of
batteries. Contact your local authorities to
find out where your nearest disposal area is.
Do not dispose of batteries with domestic
refuse. Do not dispose of by burning, risk of
explosion.
English
11